EN
Magnetic chamfer strips
Our magnetic triangular strips are used for the quick and clean creation of chamfers, water noses or dummy joints in precast concrete production.
We offer you the triangular strips in different materials:
- Rubber (with steel core)
- Steel
- Solid rubber
Your advantages with triangular magnetic strips from RATEC:
- Reusability
- High and reliable adhesive force
- Environmentally friendly (replaces polystyrene and plastic mouldings)
- Time-saving
FAQ: What does 50% or 100% magnetised mean?
With the 100% magnetised chamfer strip, the strip is completely filled with magnets. With the 50% magnetised chamfer strip, only every other magnet is used, with the gaps between the magnets being filled with synthetic resin. Please contact us if you are not sure which variant is right for you. Our experienced consultants will be happy to help you.
FAQ: Differences between rubber and steel chamfer strips
Today there are not many significant differences between the two materials. Steel used to be the material for shorter strips and rubber for longer strips, but today both materials can be offered in many variants and lengths. The most significant difference is the weight, with steel chamfers weighing more than rubber chamfers.
As magnetic strips are often put in place using hammers, it is crucial to pay attention to using rubber hammers in any case. Rubber usually better absorbs external influences, e.g. hammer strokes etc. Using non-rubber hammer can damage steel faster. Therefore, a rubber hammer is obligatory for handling steel chamfer strips in general.
With the right treatment, including oiling and right storage steel is the more resilient material and lasts longer, while rubber wears out quicker over time. In general, good treatment and maintenance will ensure a long lifespan of magnetic chamfer strips, no matter the material.
Excerpt from our extensive triangular strip programme
Magnetic chamfer strips made of rubber (with steel core)
Magnetic chamfer strips made of rubber (with steel core) –
magnetised on one side
Magnetic chamfer strips made of rubber (with steel core) – magnetised on one side
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (in) | Magnetised | |
|---|---|---|
| 02123 Art. No. 02123 | 1/2" x 1/2" | 50 % |
| 03205 Art. No. 03205 | 3/4" x 3/4" | 50 % |
| 02126 Art. No. 02126 | 1/2" x 1/2" | 100 % |
| 03206 Art. No. 03206 | 3/4" x 3/4" | 100 % |
| 06440 Art. No. 06440 | 1" x 1" | 100 % |
| 04372 Art. No. 04372 | 1 1/8'' x 1 1/8'' | 100 % |
Magnetic chamfer strips made of rubber (with steel core) –
magnetised on both sides
Magnetic chamfer strips made of rubber (with steel core) – magnetised on the bottom
Magnetic chamfer strips made of solid rubber (flexible)
Magnetic chamfer strips made of solid rubber (flexible)
Standard lengths: 2000 mm and 3000 mm Bending radius: min. 500 mm (300 mm for Article no. 11442)
| Dimensions A x B x C (mm) | Magnetised | |
|---|---|---|
| 11442 Art. No. 11442 | 10 x 10 x 15 | Single side 2-pin |
| 11957 Art. No. 11957 | 15 x 15 x 21 | Single side 2-pin |
| 02155 Art. No. 02155 | 20 x 20 x 28 | Single side 2-pin |
Magnetic chamfer strips made of steel – magnetized on one side
Magnetic chamfer strips made of steel – magnetised on one side
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (in) | Magnetised | |
|---|---|---|
| 03119 Art. No. 03119 | 3/8" x 3/8" | 50 % |
| 03035 Art. No. 03035 | 1/2" x 1/2" | 50 % |
| 05340 Art. No. 05340 | 3/8"x 3/8" | 50% |
| 03102 Art. No. 03102 | 3/8" x 3/8" | 100 % |
| 02901 Art. No. 02901 | 1/2" x 1/2" | 100 % |
| 05341 Art. No. 05341 | 3/4" x 3/4" | 100 % |
Magnetic chamfer strips made of steel – magnetized on both sides
Magnetic chamfer strips made of steel – magnetised on both sides
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (in) | Magnetised | |
|---|---|---|
| 02547 Art. No. 02547 | 3/8" x 3/8" | 50 % |
| 03141 Art. No. 03141 | 1/2" x 1/2" | 50 % |
| 05342 Art. No. 05342 | 3/4" x 3/4" | 50 % |
| 03138 Art. No. 03138 | 3/8" x 3/8" | 100 % |
| 03142 Art. No. 03142 | 1/2" x 1/2" | 100 % |
| 05343 Art. No. 05343 | 3/4" x 3/4" | 100 % |
Magnetic chamfer strips made of steel – magnetized on the bottom
Magnetic chamfer strips made of steel – magnetised on the bottom
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (in) | Magnetised | |
|---|---|---|
| 04143 Art. No. 04143 | 3/8" x 3/8" | 50 % |
| 03143 Art. No. 03143 | 1/2" x 1/2" | 50 % |
| 05344 Art. No. 05344 | 3/4" x 3/4" | 50 % |
| 04142 Art. No. 04142 | 3/8" x 3/8" | 100 % |
| 03144 Art. No. 03144 | 1/2" x 1/2" | 100 % |
| 00109 Art. No. 00109 | 3/4" x 3/4" | 100 % |
