EN
Magnetic chamfer strips program
Our magnetic triangular strips are used for the quick and clean creation of chamfers, water noses or dummy joints in precast concrete production.
We offer you the triangular strips in different materials:
- Rubber (with steel core)
- Steel
- Solid rubber
Your advantages with triangular magnetic strips from RATEC:
- Reusability
- High and reliable adhesive force
- Environmentally friendly (replaces polystyrene and plastic mouldings)
- Time-saving
FAQ: What does 50% or 100% magnetized mean?
With the 100% magnetized chamfer strip, the strip is completely filled with magnets. With the 50% magnetized chamfer strip, only every other magnet is used, with the gaps between the magnets being filled with synthetic resin. Please contact us if you are not sure which variant is right for you. Our experienced consultants will be happy to help you.
FAQ: Differences between rubber and steel chamfer strips
Today there are not many significant differences between the two materials. Steel used to be the material for shorter strips and rubber for longer strips, but today both materials can be offered in many variants and lengths. The most significant difference is the weight, with steel chamfers weighing more than rubber chamfers.
As magnetic strips are often put in place using hammers, it is crucial to pay attention to using rubber hammers in any case. Rubber usually better absorbs external influences, e.g. hammer strokes etc. Using non-rubber hammer can damage steel faster. Therefore, a rubber hammer is obligatory for handling steel chamfer strips in general.
With the right treatment, including oiling and right storage steel is the more resilient material and lasts longer, while rubber wears out quicker over time. In general, good treatment and maintenance will ensure a long lifespan of magnetic chamfer strips, no matter the material.
Excerpt from our extensive triangular strip programme
Magnetic chamfer strips made of rubber (with steel core)
Magnetic chamfer strips made of rubber (with steel core) –
magnetized on one side
Magnetic chamfer strips made of rubber (with steel core) – magnetised on one side
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (in) | Magnetised | |
|---|---|---|
| 02123 Art. No. 02123 | 1/2" x 1/2" | 50 % |
| 03205 Art. No. 03205 | 3/4" x 3/4" | 50 % |
| 02126 Art. No. 02126 | 1/2" x 1/2" | 100 % |
| 03206 Art. No. 03206 | 3/4" x 3/4" | 100 % |
| 06440 Art. No. 06440 | 1" x 1" | 100 % |
| 04372 Art. No. 04372 | 1 1/8'' x 1 1/8'' | 100 % |
Magnetic chamfer strips made of rubber (with steel core) –
magnetized on both sides
Magnetic chamfer strips made of rubber (with steel core) – magnetised on the bottom
Magnetic chamfer strips made of solid rubber (flexible)
Magnetic chamfer strips made of solid rubber (flexible)
Standard lengths: 2000 mm and 3000 mm Bending radius: min. 500 mm (300 mm for Article no. 11442)
| Dimensions A x B x C (mm) | Magnetised | |
|---|---|---|
| 11957 Art. No. 11957 | 15 x 15 x 21 | Single side 2-pin |
| 02155 Art. No. 02155 | 20 x 20 x 28 | Single side 2-pin |
| 19855 Art. No. 19855 | 20 x 20 x 28 | on bottom 2-pole |
Magnetic chamfer strips made of steel – magnetised on one side
Magnetic chamfer strips made of steel – magnetised on one side
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (mm) | Magnetised | |
|---|---|---|
| 03119 Art. No. 03119 | 10 x 10 x 14 | 50 % |
| 03035 Art. No. 03035 | 15 x 15 x 21 | 50 % |
| 03102 Art. No. 03102 | 10 x 10 x 14 | 100 % |
| 02901 Art. No. 02901 | 15 x 15 x 21 | 100 % |
| 05341 Art. No. 05341 | 20 x 20 x 28 | 100 % |
| 02075 Art. No. 02075 | 25 x 25 x 35 | 100 % |
Magnetic chamfer strips made of steel – magnetised on both sides
Magnetic chamfer strips made of steel – magnetised on both sides
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (in) | Magnetised | |
|---|---|---|
| 03207 Art. No. 03207 | 3/4" x 3/4" | 50% |
| 03208 Art. No. 03208 | 3/4" x 3/4" | 100 % |
| 05463 Art. No. 05463 | 2" x 2" | 50% |
| 10777 Art. No. 10777 | 1 1/8'' x 1 1/8'' | 100 % |
| 11645 Art. No. 11645 | 1" x 1" | 100 % |
Magnetic chamfer strips made of steel – magnetised on the bottom
Magnetic chamfer strips made of steel – magnetised on the bottom
Standard lengths: 2000 mm and 3000 mm
| Dimensions A x B x C (mm) | Magnetised | |
|---|---|---|
| 03139 Art. No. 03139 | 10 x 10 x 12 | 50 % |
| 04143 Art. No. 04143 | 10 x 10 x 14 | 50 % |
| 03143 Art. No. 03143 | 15 x 15 x 21 | 50 % |
| 05344 Art. No. 05344 | 20 x 20 x 28 | 50 % |
| 03140 Art. No. 03140 | 10 x 10 x 12 | 100 % |
